Osama Abdallah

- Responsibilities for example but not limited to the following
* Construct Geodatabase for the collected data from both external (Riyadh infrastructure project center) and internal departments (Urban planning Agency).
* Doing all GIS works for the ongoing and future bridges, tunnels, Roads,
Street Lighting & storm networks projects under the 5ypp.
* Review and involved in the approval process for all RFPs issued by all departments under Amana for tender processing.
* Participating in Developing scope of work for engineering works , Requests for Proposals (RFPs) and also review incoming proposals.
* Follow up all design stages for road and infrastructure projects.
* Participating in the evaluation process for contractor and consultant bids.
* Support the team in verification and update of technical evaluation criteria according to EXPRO.
* Evaluate several consultants’ firms in terms of pre-qualification requirements

Working in the Technical Office of King Faisal Air Academy project to review all the Drawings, Plans, Shop Drawings,etc.

Main Responsibilities, For example but not limited to the following:
- Reviewing & Verifying all the Coordinates & Levels of the Buildings, roads, Utilities, Infrastructure, etc. for the project.
- Review all the surveying works of the Airfield , Flight Runways & Taxiways such as the Coordinates and all the services and utilities related to Runway & Taxiways,
Aprons, Runways Lights coordinates, Signals marks& all of Obstacles, …….etc.
- Preparing Reports for SANS (Saudi Air Navigation Services) to approve the Air
field.
- Design simple roads by Civil 3D.

- Construct geodatabase for all the project components such as Buildings, Airfield,
Taxiway, Roads, all Infrastructure networks, etc.
- Solving all the Technical problems related to Surveying & Infrastructural works in
site.
- Review the Backfilling quantities by Civil 3D Program.

• Construct Geodatabase for some Infrastructure projects _ Freelance _ remotely
• Design simple roads by Civil 3D
• Calculation of Backfilling quantities by Civil 3D Program for some Projects.
• 
  

• We are working in many multibillion prestigious projects in all over Saudi Arabia (The project of the Custodian of the Two Holy Mosques for developing the Security Headquarters –KAP2 )

- Main responsibility :-

• Reporting to Technical Manager
• Supervising on approximately 35 Surveyors working in about 55 sites all over
• Kingdom of Saudi Arabia
• Preparing all the data and coordinates for the handovering of new projects and
• Reviewing & Approving the Topographic survey
• Preparing initial surveying report for the new sites
• Reviewing all the GIS works related to all projects
• Construct Geodatabase for some projects of KAP2
• Preparing primary Hydrolgical study for the site by WMS& GIS
• Reviewing & approve all the coordinates for the Buildings, roads, Utilities
• Infrastructure, etc
• For all projects
• Solving all the technical problems related to survey works in all sites
• Follow up all surveying works in all sites with the surveyors from the beginning of the project to the End...etc..

• SENIOR SITE& SURVEY ENGINEER in many multimillion
  prestigious porjects and royal palaces in OBHUR area – North of JEDDAH such as:-
  * HRH PRINCE TURKI BIN NASSER PALACE – Construction Management department.
  * HRH PRINCE FAHD BIN SULTAN PALACE – Construction Supervision department.
  * HRH PRINCE NAIF BIN ABD ELAZIZ PALACE –ALBADIAAH PLACE Construction Supervision department.
  My responsibilities:-
  # Survey works for the new projects( Collecting data.....Grid survey&
  observation of Ground control points using GPS and Total station) for design
  department.
  # Supervision of all civil site works to construct the aforementioned project Buildings, landscape, roads, infrastructure, marina…etc.
  # Supervision of all Marina works using Dredging method
  #(Construction of quay wall 100M long, Slip way, Floating stages, rock protection, Swimming area, etc).
  # Revision of a payments certificates& Quantities survey of all works for the aforementioned projects.
  *Working in Golden Tower construction 49 Floors at the Kornish of Jeddah -Foundation Piles works.
  My Responsibilities: Supervisions on the following works:
  # Setting out the pile location.
  # Installation of temporary steel casing of required lengths by rotary.
  #Drilling at pile locations down till design toe levels.
  #Installation of steel reinforcement and Pouring Concrete

The Job: Sr. Surveying Engineer In The Head Office (Surveying Department).
Working in many projects (Field&office) in & outside Egypt such as:-
• KINGDOM OF SAUDI ARABIA: Feb. 2004 – Feb. 2005
Ministry of Water & Electricity _ Water & Sanitary Drainage Authority , Makkah Al Mukarramah
( Project for the sanitary Drainage Master Plan for Jeddah City )
The responsibility:
▪ Team leader
▪ Updating and leveling for the obtained map from the client as the designer requirements.
▪ Construction and Observation of ground control points &Bench markes.
▪ Grid leveling for Proposed wastewater Treatment Stations.
• ARAB REPUNLIC OF YAMEN: Oct. 2003 – Feb. 2004
Ministry of Water ( Project for the Sanitary Drainage Master Plan for
SIEON&TARIEM Cities – WADI HUDRAMOUT ).
The responsibility:
▪ Team leader.
▪ Construction and Observation of ground control points.
▪ Grid Survey for the fore both cities.
▪ Setting out of Waste-Water Treatment points(WWTP) in both cities.

• The Job: Site & Surveying Engineer In Water Supply Project For ElSheikh Zayed City.
  The responsibility: Supervision of the following activities:
  • Construction of water treatment plant.
  • Construction of 2 pumping station in intake & booster.
  • Laying & installation of raw water pipelines (G.R.P) 1800mm,19km long.
  • Construction of valves chambers along pipelines.
  • Construction of thrust blocks for bends along pipelines.
  • Construction of tunnel under Cairo – Alexandria desert road (200m long).
  • Revision of a payment certificate & Survey quantity of all works
  Project Value: 120,000.000 $

• My duties & responsibilities are;
  Site & Surveying engineer for:
  1- The Micro tunnel machine:
  • Sinking manholes 5.25 to 2.59m inner diameter as full depth, using drag
  line for launch & reception of the micro tunnel machine 600 to 1000mm
  inner diameters.
  • Setting up the site for launch & reception of micro tunnel machine.
  2- Day-to-Day running of the Work & Supervised two shifts of approximately 20
  Staff & labour
  3- Shafts sinking and construction launch / Reception chambers under low pressure
  compressed air (L.P.C.A).
  4- Utilities Diversion.
  5- Making traverse network for the area of contract (Calculation &Observation).
  6- Making B.M. Network (Leveling & Calculations).
  7- Making Cadastral Survey for the area of contract.
  8- Observing & laying out the axis of the Shafts.
  9- Making Wire Drop for the shafts after sinking to determine the C.P. of them.
  10- Design the Alignment of the tunnel (Line-Level).
  11- Making Wiessbachk Triangles for the shafts to determine the Base Line for the tunnels.
  12- Checking the alignment & level of the Shield Machine.
  13- Making AS built for the Tunnels (Line & Level) after finishing the Shield work.

• Execution of all the survey works for Mubarak Security Academy Project (Wady el Nile Company.)
• For Real -Estate Investment & Contracting), under the supervision of The Arab Office for Consultation & Design, with the following scope of work: -
• Executing a second order Triangulation network (GPS), for 24 points, covering 2000 feddans
• Executing a spot leveling network for the aforementioned area
• Setting out the internal utilities network
• Executing and supervising the survey works necessary for the CCP (Compass Calibration Pad) Project in Abu Hamad Military Airport (American Contractors Limited Co
• Survey works and spot level for an area of 1300 feddans located in Cairo -, Kilo 70
• Survey works for the site and buildings for Al - Gouna Resort owner in Hurghada.