ELzoghbi Eslam,MSc

A private joint-venture company formed by a group of Egyptian companies in partnership with Governmental entities. The main objective of the company is to establish a rolling stock plant in a prospective area of tentatively 300,000 m2 located in East Port Said Industrial which is part of the Suez Canal Economic Zone.

• Responsible for conducting pre-use inspection of both reinforcement cages and plunge columns - recording their installation safely to comply with desired designed position.
• Maintaining accurate records such as daily diary, photographs, records of site discussions
• Producing Activity Control Plans / Inspection and Test Plans and obtaining approval
• Responsible for quality management during drilling; this includes piles verticality, slurry, depth and bottom cleanness.
• Producing accurate daily diary of resources, including labour, plant, materials, subcontractors and outputs
• Producing weekly measures, take offs and schedule materials accurately.
• Creating the pile progress plan and Conducting detailed shift reports, daily diary and productivity & delays reports. These required liaising with rig Operators, site supervisors and the management team to ensure the productivity of the project

The Cairo Ring Road is the most important freeway of the Greater Cairo metropolitan area in Egypt. The ring road encircles large parts of the cities of Cairo and Giza, including Cairo International Airport. which have fill and cut works '' i.e bridges , tunnels , earth-working , piling and tangent piles(CFA).

• Responsible for the quality management during site; this includes piles setting out, depth and bottom cleanness , tangent piles and earthing ground work.
• Reading information from drawings, schedules and specification
• Estimated quantities and material costs during project planning to support budgeting and costing.
• Communicating weekly programme targets to the workforce and liaising with subcontractors to ensure works undertaken in line with weekly programme
• Create detailed workshop (R.F.T) drawings and specifications of bridges and industrial works for contractors to follow and understand. This is also likely to require using computer-aided design (CAD software).
• Perform field activities such as observe and record existing field conditions, take and verify measurements within project area.
• Involved in a preparation of reports, designs, specifications and contract documents.
• Ensure that design briefs are completed satisfactorily.
• Provided technical and professional engineering support services in design, construction and structural engineering.

• Responsible for Mono-Pile co-ordinate for long path (43 km) with the utilities.
• Reading information from drawings, schedules and specification
• Recording pile's concrete tests, process and management.
• Inspected installation of precast structures, underground services, concrete and earthworks.
• Estimated quantities and material costs during project planning to support budgeting and costing.
• Attended industry training, association meetings and topical seminars to enhance job knowledge and skills.

• Drafted structural plans using various computer-aided design solutions
• Setting out and producing surveys
• Prepared workshop drawing for obelisk base , which was rested on metro's tunnel wall diaphragms and design feeding tank.
• Completed accurate engineering calculations for weights, loads and other metrics using both manual and digital methods.
• Developed and implemented solutions to maintain and improve client infrastructure at existing sites.
• Integrated known material stress factors into construction planning to support safe and lasting buildings and infrastructure.

• Performed design and preparing structural drawings with calculation sheets using an appropriate Structural analysis programs:

- Building (B) (single, double, triple) which was five stories, R.C system.

- Building (A) which was eleven stories, R.C system designed to resisted lateral loads.

- Building (D) which was eleven stories, R.C system designed to resisted lateral loads.

- Building (G) which was five stories, R.C system.

Which all above were approved from the authorities of building and safety.

• Performed analysis via sap2000 , safe and etabs models technical designs and prototypes in development stage.

• Participating in performing work shop drawing for R.F.T Details with approved B.B.S.
• Participated in design reviews within team-based structural planning committees.
• Calculated load levels and material stress factors .

• Performed design and prepared R.C. structural drawings for Administration Building.
• Performed design and preparing steel structural drawings for luggage Building.
• Performed design and prepared R.C structural drawings for slab on grade for 4 halls according (BS-8110).
• Participated in preparing structural drawings for:

-Sorting and Loading Area ( steel structure ).

- Departure Hall check in ( steel structure ).

• Developed and implemented performance improvement strategies and plans to promote continuous improvement.
• Prepared presentations outlining proposed designs to customers and incorporated feedback into final plans.

• Performed design , studied method of transfer of Al-Ferdan and structure's system that was used to transfer the body of bridge which this bridge is a double swing bridge with a steel truss superstructure and a span of 340m between pivot pier centerlines. The total weight of the bridge is 13 200 t.

• Co-coordinated different activity with J.V partners , which are Hitachi Solutions L.T.D and O.T.V ,those are Japanese and France company using REVIT software .
• Performed and prepared R.C. work shop drawings (W.S.D) for the below Using ASD :

1) RO-Electrical Building.

2) UF-Electrical Building.

3) UF-CIP Building.

4) UF-Backwash Building.

5) Settled Water Tank Building.

6) RO-CIP Building.

• Performed and prepared Design R.C. structure for the below (using BS-8110 Code) :

1) UF-CIP Building.

2) RO-CIP Building.

• Performed Check and Review Design R.C. structure for the below (using BS-8110 Code) :

1) Settled Water Tank Building.

2) RO Building.

• Provided technical and professional engineering support services in design and construction

• Participated in design of school of languages project – 6 Oct.
• Design of 9 R.C Structural building.
• Participated in review the design of king Abdulaziz university
  Saudi Arabia – Jeddah which had been done using
  ACI-codes.4-design co-ordinate commercial –mall has 4200
  meter sq. responsibility:
  prepared co-ordinate with different activity .
  prepared structure system and drawing .
  prepared Shop Drawing for each structural element .
• Collaborated with clients, architects, engineers, contractors and sub-consultants on projects.